An aerial view at dusk of a lit pool and raised spa, a fire pit on the lawn, and step and planter lights around the terrace

Outdoor Lighting

Outdoor Lighting Installation in Atascadero

Outdoor lighting installation and landscape lighting for Atascadero homes, from oak-studded acreage to in-town lots near the Sunken Gardens. Hot, dry days push outdoor living into the evening here, and cool nights make a lit pool deck or fire pit the place to be. We design around your property and the native trees the city protects, then install with our own crews.

Service options

LED wall sconces on cedar panels casting light up and down inside a white stucco arch, beside a small spa and pebble-jointed pavers

Energy-Efficient LED Lighting

Best for Anyone who wants long-lasting, low-energy lighting that still looks warm and inviting.

  • Uses a fraction of the power of the halogen systems it replaces
  • Integrated LED fixtures are commonly rated for tens of thousands of hours
  • Warm color temperatures, around 2700K to 3000K, that suit dark-sky guidance
  • Solid brass and copper bodies that stand up to coastal air
  • Low-voltage cable that is safe to run through planting beds

On your property Low-voltage cable runs underground from a transformer on an outdoor outlet. Fixture locations are planned during design, not added after the planting is in.

  • Pathways
  • Garden beds
  • Trees and architecture
  • Patios and decks

Lantern Courtyard Escape

Mid-Wilshire, Los Angeles

A pool terrace at dusk with lantern sconces beside two sets of French doors, an uplit wall fountain, lit steps, and path lights in the planting

Shown: Lantern Courtyard Escape, Mid-Wilshire, Los Angeles

How we work

  1. A plain lawn and small patio behind a two-story house, before any lighting or hardscape was designed Before

    Site analysis

    We measure the property, locate every protected native tree, and note slopes, outlets, and sightlines before a single fixture goes on the plan.

  2. An existing site plan marked up by hand with the designer’s notes, including a key for step, spot, flood, and path lights Site plan notes

    Initial consultation

    With the site analysis in hand, you sit down with a designer and mark up the existing site plan: what should be lit, from the steps to the spa, and what should stay dark.

  3. A conceptual landscape plan with a lighting legend listing path lights, floodlights, uplights, and step lights, split into two build phases Lighting plan

    Conceptual design

    The lighting goes onto the color plan with everything else. Every fixture gets a symbol, a model, and a count, so you can see exactly what will be lit before anything is ordered.

  4. A rendering of an outdoor dining area under a fabric shade structure strung with bistro lights Rendering

    Final design

    A rendering shows how the finished space will look and feel, string lights and all, so the lighting is judged in context instead of as a list of fixtures.

  5. The finished dining area at dusk, with bistro lights strung under the shade structure above a long table and an outdoor kitchen Finished

    Installation

    Our crews run the low-voltage cable, set the transformer and fixtures, and fine-tune the aiming once it is dark enough to see the result.

Key decisions

Things worth knowing before a first consultation.

  • LED versus other fixture types

    LED fixtures cost more upfront than the halogen systems they replace, but draw far less power and last much longer.

  • Smart controls versus a simple timer

    Smart systems allow zoning, dimming, and remote control. A basic astronomical timer is simpler and still follows sunset through the year.

  • Fixture placement and glare

    Shielded, downward-facing fixtures keep light on the path and out of windows, neighboring yards, and the night sky.

  • Security versus ambiance

    Security lighting favors broader coverage on motion sensors. Ambiance lighting uses softer, more selective accents on a schedule.

  • Wiring and conduit timing

    Low-voltage cable and sleeves are easiest to run during construction, before paving and planting are finished.

  • Integration with other features

    Lighting is planned alongside patios, pools, and planting rather than added as an afterthought.

  • Protected native trees

    Atascadero’s Native Tree Ordinance, in place since 1998, protects twelve native species, including its oaks, starting at just a few inches of trunk diameter. Lighting cable and fixtures are planned around those trees, not through their roots.

Investment and timeline

No quote written off a photograph can account for what your property is like.

What shapes the investment

  • Number and type of fixtures
  • LED versus other lighting technology
  • Smart controls and zoning
  • Wiring and transformer requirements
  • Whether lighting is added to existing hardscape or planned with new construction

What shapes the schedule

  • Design and fixture selection
  • Coordination with other trades during construction
  • Transformer and control system setup
  • Testing and adjustment after installation

Why outdoor lighting was drawn together with the rest of the property

Decking, drainage, utilities, planting, shade and lighting all bear on where a feature goes and how it gets built. Settling them on one set of drawings is what keeps conduit out of the wrong trench and stops paving being cut to fit afterward.

  • Path lights on the planting plan Seven solid brass path lights are called out by model on the plan’s lighting legend, set along the new planting beds.
  • A finish chosen to last Solid brass with a natural bronze finish darkens with age instead of corroding, so the fixtures settle into the planting over time.
  • Drawn with the pool and deck The lighting sits on the same sheet as the pool, the paver deck, and the planting, so cable runs are planned with the rest of the work.
  • Placed for the mature garden Fixtures along the beds are spaced for the planting as it fills in, not just for how it looks on day one.
The conceptual plan for an Atascadero pool project, with a lighting legend calling for seven solid brass path lights along the new planting
The design sheet: layout, drainage, planting and lighting
The finished Atascadero pool, with a cobble paver deck and low block wall, lounge chairs, and a view over oak-covered hills
The same yard built: Outdoor Lighting, Atascadero

Access, engineering, permits, finishes and scope vary a lot from one property to the next, so the investment and the schedule for your project are set once we have seen the site and the design is settled.

Tell us about the property and what you want the space to do. We will walk through the design, site and permitting factors likely to shape it.

What customers say

  • They completely remodeled our pool, added a hot tub, and handled all the lighting and landscaping. Our project supervisor, Juan, demonstrated great communication and meticulous attention to detail, taking extra care to ensure that every aspect was safe for our kids and our puppy. This is clearly a company that takes genuine pride in their work.

    Sarah Johnson Google review Pool remodel, lighting, and landscaping
  • The company used its own crews, treated the yard and homeowner with respect, and got the job done on time. Having the same team throughout meant consistency and accountability. We appreciated their professional approach and the respect they showed our property.

    Ronnie Stewart Google review In-house crews, on-time work

Read all Pacific Outdoor Living reviews on Google

Frequently asked questions

Does Pacific Outdoor Living install outdoor lighting in Atascadero?

Yes. Atascadero is served by our San Luis Obispo office, and we design and build here, including the Atascadero pool project whose conceptual plan and lighting legend appear on this page.

Which path lights hold up to Atascadero’s summer heat?

Solid brass fixtures with a natural bronze finish, like the ones specified on the Atascadero pool plan shown here. They handle sun, heat, and irrigation overspray and weather to a darker patina over time, where painted finishes tend to fade and chalk in full sun.

Do I need a permit for landscape lighting?

Low-voltage fixtures themselves usually are not the permit question. A new 120-volt outlet or circuit for the transformer usually is. We pull whatever the city or county requires through our in-house permitting department.

How long do LED landscape lights last?

Quality integrated LED fixtures are commonly rated for 30,000 to 50,000 hours, which is more than a decade of nightly use. Solid brass and copper bodies also outlast painted aluminum fixtures, especially near the coast.

Will you check on the system after it is installed?

Yes. We include a monitoring period after installation to check settings and aiming, and to confirm everything is working as designed.

Ready to get started?

Schedule a consultation with one of our designers to discuss your project goals and explore what's possible on your property.

What happens next: we set up a visit, measure the property and talk through what you want the space to do. Then you get a design to look at before you commit to anything.